Longitudinal guides

Typ M/V
Plastic-coated sliding guides
- friction value 0.06 - 0.1 at an area pressure of 0.5 N/mm
- speed up to 15 m/min
- at high transverse forces or transverse accelerations, vibrations and impacts
- for high-frequency, extremely short strokes
- V-rail of tool steel, hardened and ground
- M-rail coated with sliding lining, not hardened
Data sheet |

Typ R+K
Cross-roller guide rails
- low friction coefficient (M = 0.003)
- speed of up to 50 m/min
- type R (roller guide) is used in large load and highest precision requirements
- type K (ball guide) is less dirt sensitive and suitable for easy movements and lower load requirements
Data sheet |

Typ N/O
Needle roller guide rails
- low friction coefficient (M = 0.003)
- speed up to 50 m/min
- highest precision and stiffness
- nearly wear-free due to the "roller friction"
- for very high loads
- sealing required for protection against dirt effects
Data sheet |
Application examples |
Your consultant:

Fritz Wehinger
T: +49 7723 / 925 - 106
F: +49 7723 / 925 - 190
fritz.wehinger.xxx@keinSpam.ief-werner.de