Spindle drives for maximum loads
Positioning systems with spindle drives enable high feed forces and can move heavy loads. They are particularly suitable for high demands on positioning and repeat accuracy. In many industries, our proven linear axes with spindle drive have been successfully used for years as ready-to-install modules and are mostly used in handling technology and factory automation.
Your individual linear system in just a few steps
The selection of a suitable linear system is based on various factors:
- Dynamics (cycle time)
- load (availability)
- moving mass (payload)
- repeat accuracy
- environmental conditions at the place of use
The new online tool supports you in configuring and requesting your linear system. With just a few clicks, you can adapt the linear system specifically to your requirements and send an enquiry to our sales team.
|
start configurator |
Spindle drives
MS 60
- max. stroke: 100 mm
- repeat accuracy: < 0.002 mm
- recommended maximum handling weight: 5 kg
- for narrow spaces
| Data sheet |
| CAD data |
| Product details |
profiLINE 50
- max. stroke: 175 mm
- repeat accuracy: +/- 0.005 mm
- recommended maximum handling weight: 5 kg
- spindle pitch: 1 or 6 mm
| Data sheet |
| CAD data |
| Product details |
| Accessories |
profiLINE 70
- max. stroke: 485 mm
- repeat accuracy: +/- 0.003 mm
- recommended maximum handling weight: 15 kg
- spindle pitch: 5 or 10 mm
| Data sheet |
| CAD data |
| Product details |
| Accessories |
profiLINE 115
- max. stroke: 1200 mm
- repeat accuracy: +/- 0.02 mm
- recommended maximum handling weight: 60 kg
- spindle pitch: 5, 10 or 16 mm
| Data sheet |
| CAD data |
| Product details |
| Accessories |
profiLINE 140
- max. stroke: 1440 mm
- repeat accuracy: +/- 0.02 mm
- recommended maximum handling weight: 100 kg
- spindle pitch: 5, 10 or 20 mm
| Data sheet |
| CAD data |
| Product details |
| Accessories |
profiLINE 200
- max. stroke: 1740 mm
- repeat accuracy: +/- 0.02 mm
- recommended maximum handling weight: 200 kg
- spindle pitch: 5, 10, 20 or 25 mm
| Data sheet |
| CAD data |
| Product details |
| Accessories |
LINE 200 GG
Features
- standard strokes: 190 and 350 mm
- repeat accuracy: +/- 0.003 mm
- recommended maximum handling weight: 150 kg
- spindle diameter: 20 mm
- ground slide parts of GG 25 ensure high system accuracy and good damping features
| Data sheet |
| CAD data |
| Product details |
LINE 250 GG
Features
- standard strokes: 230, 350 & 360 mm
- repeat accuracy: +/- 0.003 mm
- recommended maximum handling weight: 250 kg
- spindle diameter: 25 mm
- ground slide parts of GG 25 ensure high system accuracy and good damping features
| Data sheet |
| CAD data |
| Product details |
Your consultant:
Günter Walenta
T: +49 7723 / 925 - 133
F: +49 7723 / 925 - 190
guenter.walenta.xxx@keinSpam.ief-werner.de